TESTER DVM-853BL digital multimeter

DC voltage: 0-200 mV / 2 V / 20 V / 200 V / 500 V
basic accuracy: ± (1.0% rdg + 2 digits) , ± (1.2% rdg + 2 digits) for 500 V range
input impedance: 1 MOhm
overload protection: 500 V DC or AC rms
AC voltage: 0-200 V / 500 V
basic accuracy: ± (1.5% rdg + 3 digits)
input impedance: 450 kOhm
frequency range: 40-500 Hz
overload protection: 500 VDC or AC rms
DC current: 0-200 µA / 2 mA / 20 mA / 200 mA /10 A
basic accuracy: ± (1.5% rdg + 2 digits), ± (2.0% rdg + 2 digits) for 200 mA range; ± (2.0% rdg + 3 digits) for 10 A range
overload protection: 0.5 A / 500 V fuse for µA and mA range; 10 A / 500 V for 10 A range
resistance: 0-200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm
basic accuracy: ± ( 1.0% rdg +5 digits); ± (1.0% rdg + 3 digits) for 2 kOhm to 200 kOhm range, ± (1.5% rdg + 3 digits) for 2 MOhm range
overload protection: 0.5 A / 500 V fuse
audible continuity measurement: built-in buzzer sounds if resistance is less than 50 Ohm
test voltage: approx. 1.8 V
diode measurement: test forward voltage of diode
forward DC current: approx. 10 µA
reversed DC voltage : approx. 1.8 V
overrange: yes
continuity buzzer: yes
diode test: yes
low-battery indication: yes
maximum display: 3 1/2
LCD display:
size: 54 x 27 mm
digits: max. 1999
data hold: yes
backlight: yes
auto power-off: no
dimensions: 138 x 67 x 30 mm
weight (with battery): 120 g
power supply: 2 x AAA LR03 (incl.)
operating environment:
temperature: 0 °C to 40 °C (32 °F to 104 °F)
humidity: < 80% RH storage environment: temperature: -20 °C to 60 °C (-4 °F to 140 °F) humidity: < 90% RH fuse: F0.5 A / 500 V 5 x 20 mm F10 A / 500 V 5 x 20 mm test lead probe : CAT III 600 V, 10 A, L = 70 cm IP rating: IPX0